Linksys extender blinking green light? Here’s what to do
Is your Linksys Wireless extender blinking green for long and hampering your wireless connection? You are not alone. Many users report of such issues occurring with their linksys extenders especially during the firmware update or when it is turned on after a long break. Fortunately, there’s always ways you can troubleshoot such extender related issues and take a break. If you find your Linksys extender blinking green light, this blog will walk you through the easy steps to troubleshoot the issue in no time.
Linksys extender flashing green- What to know?
Linksys is among the leading wireless network systems available for use by people. They provide fast internet speeds and help you get excellent performance when it comes to work, gaming or entertainment. However, issues like linksys extender blinking green light can disrupt your peace and make you look for ways to troubleshoot them. With the right information, you’ll be able to resolve most of such issues and use the internet easily.
If your Linksys range extender blinking green light, and you are unsure what to do, you can simply start by identify the factors that are causing this issue. Resolving every issue starts with identification of the core issue and then following the steps around the same. Once you have the information about the same, half the troubleshooting is done. There are three different types of green light variations you’ll notice in your Linksys extender. These are:
- Linksys extender flashing green Light
- Solid Green Light
- Blinking Green and Then Turning Off
Now, based on the real issue that you identify, you can follow troubleshooting steps easily. But, you will need to understand what each of the issue means and the reasons why they may be happening.
Why is my Linksys extender blinking green?
Your linksys extender flashing green issue can have various indications. It means that your Linksys extender is booting up. It can be after a shut down or after it is reset to factory settings. Another reason why your linksys extender blinking green light issue can arise is due to firmware update. If you are updating the firmware version, it can sometimes get stuck in the process due to reasons beyond your control, causing the issue.
If the extender light is solid, the indication is that the setup was complete and the device is ready to use. In this case you will see the Linksys green light but internet working. On the other hand, if the light is green first and then it turns off, it means that the firmware update process is in progress and your internet connection is being cut off. Other times, due to your internet connection being weak, you can face such issues as well.
Here is a brief breakdown on the reasons why you may face issues with the Linksys extender:
- Incorrect Location of your Linksys Extender
- Too many devices connected to the extender network
- Network authentication issues
- Connectivity issues
- Hardware related issues
All of these reasons can significantly contribute to Linksys range extender blinking green and not working. But, there are always some steps you can follow to troubleshoot the issue.
Linksys range extender blinking green how to fix
As discussed, there can be more than one reasons/ factors that can contribute to the linksys extender flashing green issue. But, there are also steps you can follow to resolve them and get started with seamless internet access again.
Incorrect Location of your Linksys Extender
If your internet is not working properly and the supply is not optimum then it can cause the linksys extender flashing green continuously. There are various reasons for this problem. So, first of all, check for all the interruptions. Make sure that the device is in the center of the house. There are no big walls or objects in front of the internet supply. The electromagnetic field from other wireless devices can cause connection issues. Remove them if they are near your device. The distance between your host device and the extender should not be more than the suggested distance.
Too many devices connected to the extender network
If your extender is providing the internet to too many devices, it can cause network congestion. It impacts your internet connection speeds and coverage in some cases. If your device is in the process of a firmware update and the update gets interrupted in the middle, it can result in your Linksys Extender Blinking green light. You can try to disconnect the unwanted devices or you can opt for an upgraded internet plan.
Network authentication issues
If your Linksys Extender is not able to authenticate the host device, you might see the Linksys extender flashing green light no internet. In this situation, the light on your extender will continue to blink because of the ongoing authentication process of your extender.
Connectivity issues
A weak connection can also be the reason for the problem of Linksys Extender Blinking Green light. You can check all the cables and try to restart your device. If this doesn’t work out for you, then you can consult your Internet Service Provider if there is any problem from the back end.
Hardware related issues
If your Linksys extender blinking green light not connecting, it could also be the case that the LED light in your extender is not functioning properly, and that is why it is blinking. You can get in touch with the Support Team or replace the extender.
Reset your Linksys Extender
If following the above steps doesn’t yield any results, you can try to reset it to factory settings. This will erase all the device settings and personalisations you’d have made to the device. To reset the extender you can locate the button first. Once located, press and hold the reset button for about 15 seconds. Once you see the LEDs on the device flash, you can release the button and allow the reset process to complete.
If you find your linksys range extender blinking green light after reset, you will need to get the device replaced or checked by the official service center team in your city.
The Final Word
Resolving issues like linksys extender blinking green light, requires understanding the core reasons/factors that influence the issue. If you have been facing the same issue with your Linksys extender, it is wise to follow the troubleshooting steps discussed in this blog. From checking and fixing the incorrect settings using the extender.linksys.com setup wizard, to fixing the device’s location, inspecting hardware related issues, and more, you can follow the troubleshooting steps step-by-step to resolve the issues and regain access to the internet in no time.
If you still need help with the linksys range extender blinking green light issue, you can always reach out to the expert team at our end.